~/tools/

Bracing Calculator

Units
Precision

Bracing

A brace corner to corner across a frame, cut into the corners with a plumb and a level cut or square-ended, let into the studs or fixed on the face.

Inside the members
Inside the members
Drawing only
Ends
Stud centers
Brace thickness

Lengths and cuts

Brace anglediagonal 11' 3 3/4"
45.00°
Long point to long pointon the centre line, corner to corner
11' 3 3/4"
Short point to short pointalong either edge
11' 1/4"
Plumb cutfrom square · length against the post, each end
45.00° · 2 1/2"
Level cutfrom square · length along the plate, each end
45.00° · 2 1/2"
Let-in notchesone per stud at 16" centers, 4 15/16" along the stud, 1 1/2" deep
5

Frame

Diagonal brace

Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.

8' 0"8' 0"11' 3 3/4" long points45.0°let-in notches

End cut template

Both ends are the same, turned over. The corner point sits on the brace centre line.

Brace end

Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.

plumb 2 1/2"level 2 1/2"

Notch bottoms up each stud, from the plate

#MarkPosition
1stud at 1' 4"1' 1 1/2"
2stud at 2' 8"2' 5 1/2"
3stud at 4' 0"3' 9 1/2"
4stud at 5' 4"5' 1 1/2"
5stud at 6' 8"6' 5 1/2"
The link carries every input, so it opens the same calculation on a phone.