Inch fraction, decimal and mm wheel
One turn of the wheel is one inch. Fraction ticks run outward from the shared ring and decimal or mm ticks run inward, so you can see how closely a conversion matches by how the tick marks line up. Click a fraction in the tables or type in the converter to point it out.
Inch fraction, decimal and mm wheel
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Fraction tables
Click entries to add fractions together. Hover an entry to see its mm value. Click a fraction in the list to remove it.
Measure
No fractions added yet.
Eighths
Sixteenths
Thirty-seconds
Sixty-fourths
Fraction and decimal converter
Type any inch value or sum: 3 1/2 + 1/8, 1' 2" × 2, 3.625. A hyphen joins a mixed number (3-1/2); use the minus key to subtract.
Fractions, mixed numbers, feet and inch marks are all accepted.
The result appears here and is pointed out on the wheel.
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |