Run and members
Battens, balusters, pickets, studs, joists or tiles: enter the run and the member, then space them equally or to exact centers.
Member to the length line; 90° is square
End members
Spacing
Results
- Members
- 5
- Centerscentre to centre
- 1' 11 5/8"
- Gapclear between members
- 1' 10 1/8"
- First spaceafter the first member
- 1' 10 1/8"
- Last spacebefore the last member
- 1' 10 1/8"
Layout
Centers and spacing
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
End membersSpaced membersNumbers match the running list. The layout is drawn at 1:15.6.
| # | Mark | Position |
|---|---|---|
| 1 | End member 1 | 3/4" |
| 2 | Member 2 | 2' 3/8" |
| 3 | Member 3 | 4' 0" |
| 4 | Member 4 | 5' 11 5/8" |
| 5 | End member 5 | 7' 11 1/4" |
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |
The link carries every input, so it opens the same calculation on a phone.