Joint
Miter between two widths
When the two pieces are different widths the joint is not a 45° split. Enter both widths and the corner angle to get each piece's cut.
Inside angle where the pieces meet; 90° for a square corner
Color
Cuts
- Piece 1 mitersaw setting 45.00° from square
- 45.00°
- Piece 2 mitersaw setting 45.00° from square
- 45.00°
- Joint lengthouter corner to inner corner
- 4 15/16"
- Corner angle
- 90.00°
Cutting template
Printed at 100% this is true size: lay a piece on it to mark the cut.
Miter template
Printing uses the real sizes. Set the printer scale to 100% and check one dimension with a tape before cutting.
Lumber: nominal to actual
Enter actual finished sizes in every tool. A nominal 2x4 is cut and dressed to the size shown.
| Nominal | Actual |
|---|---|
| 1x2 | 3/4" x 1 1/2" |
| 1x3 | 3/4" x 2 1/2" |
| 1x4 | 3/4" x 3 1/2" |
| 1x6 | 3/4" x 5 1/2" |
| 1x8 | 3/4" x 7 1/4" |
| 1x10 | 3/4" x 9 1/4" |
| 1x12 | 3/4" x 11 1/4" |
| 2x2 | 1 1/2" x 1 1/2" |
| 2x3 | 1 1/2" x 2 1/2" |
| 2x4 | 1 1/2" x 3 1/2" |
| 2x6 | 1 1/2" x 5 1/2" |
| 2x8 | 1 1/2" x 7 1/4" |
| 2x10 | 1 1/2" x 9 1/4" |
| 2x12 | 1 1/2" x 11 1/4" |
| 4x4 | 3 1/2" x 3 1/2" |
| 4x6 | 3 1/2" x 5 1/2" |
| 6x6 | 5 1/2" x 5 1/2" |
The link carries every input, so it opens the same calculation on a phone.